Recent content by 04tbottawa

Sorry just realized you responded. I picked one up today at Kenny u pull in gatineau and she gave it to me for free cause she couldn't find it in her system. Basically I picked up 2 ignition switches a TCCM and the disconnect actuator all for a whopping $15.

Hey Mr. Roadie can you answer a simple question for me. When I installed my mevo lower control arms and tightened up the 2 bolts that attached the control arm to the bracket. I did it at full droop with the strut connected truck was on a hoist. Were those supposed to be tightened down sitting at...

I was there the other day to take off the disconnect, which broke the back half when pulling it out of the pan. Good thing is all I needed was the front half of the disconnect because my bearings were shot. Too bad the actuator wasn't still on it because that's my next thing im looking for.

Hey Roadie How hard was it to replace the lower strut yoke the two of mine are shot and I can get a good deal on some moog parts for $16.00 each. Did you use the regular C clamp balljoint kit to do it and do you have a diy or know of one to do the job.

101) 02trailelecprob- Liftmeister 2.5" Lift 102) TomCT1966 - MarkMC 2.5" full lift - front with Bilstein shocks and rear with Z71 springs and BDS shocks 103.) Heavyblaze- MarkMc 2.5 Full Lift, front bilstein,and rear bds shocks. 104.) Mean_I-Sixer BDS lift, spacers, 265/70/17 105.) johnburgelin...

for the lower balljoints all I ended up doing was bend in the tabs on the top of the balljoint, you will see the 3 tabs easily then held a ball peen hammer on it and used a 5lbs sledge, gave it a couple of good whacks and out it came.

The noise is coming from the internals of your muffler. Take a rubber mallet and hit the muffler, you wont need to hit it hard to hear it. Mine does the same thing the only way I found out what it was after checking everything else, was when I was on my back under the tb looking around and my...

WOW!!! Moose were gonna have to meet up one day so I can checkout your fan setup. And maybe over some beers we can set one up on my TB :wootwoot: Let me know.

Ottawa checking in.