mrrsm
Guru From Tampa Bay Area
Latest Activity Postings About
-
-
mrrsm replied to the thread Microsoft Bing uses OpenAI - Chat-GPT to Finally 'Challenge' The Google Search Engine.TechCrunch On-Line Magazine has two contemporary AI Stories that are worth keeping Tabs on in the Developing AI Saga... -
-
mrrsm replied to the thread NEED HELP CEL with P0332 rear knock sensor - how to test wire?.Unfortunately, it looks like the ACDelco TEC is no longer available. However, the next best "Chemical Analog" for doing this Top Engine Carbon Busting Job is: Berryman Products 2611 Intake Valve...
-
-
mrrsm reacted to trkpony's post in the thread NEED HELP CEL with P0332 rear knock sensor - how to test wire? with
Like.
I am now considering doing the AC Delco top end cleaner and getting the live OBD2 reader to check the misfires, timing changes, and fuel trim readings. But I can't seem to find the "ACDelco GM... -
mrrsm reacted to budwich's post in the thread NEED HELP CEL with P0332 rear knock sensor - how to test wire? with Like.
Actually, I think this code (and related sister code) means that the system will not being doing its job as the system disregards the output from the sensor and thus there is NO compensation done...
-
mrrsm reacted to Mooseman's post in the thread NEED HELP CEL with P0332 rear knock sensor - how to test wire? with Like.
Here's the schematic for the knock sensors. You'll want to check the wires for sensor #2. Be sure to check resistance/continuity from the sensor wires to the PCM and also to ground on both...
-
mrrsm reacted to budwich's post in the thread NEED HELP CEL with P0332 rear knock sensor - how to test wire? with Like.
Reply Have you actually looked at your misfire counts? There are likely other things associated with actual firing issues that would show up if you look at fuel trims.
-
mrrsm replied to the thread NEED HELP CEL with P0332 rear knock sensor - how to test wire?.EDIT: A Correction and Admission of Error needs adding ahead of this Post. Thanks to the follow on Posts by @budwich and @Mooseman after this one which informs My Mistake in the idea that the...
-
-
mrrsm replied to the thread Microsoft Bing uses OpenAI - Chat-GPT to Finally 'Challenge' The Google Search Engine.Again... another reason WHY getting, keeping and using your OWN locally installed Off Line LLM such as Nomic's GPT4ALL becomes seminal...for example... "I want to learn to Program in Python...But...
-
mrrsm replied to the thread Microsoft Bing uses OpenAI - Chat-GPT to Finally 'Challenge' The Google Search Engine.Precisely... and because pf YouTube AI Course Training Videos that can also "Prime The Mental Pump" like THIS one for an nVidia On-Line Four Hour AI Certification Training are both ubiquitous...
-
mrrsm reacted to azswiss's post in the thread Microsoft Bing uses OpenAI - Chat-GPT to Finally 'Challenge' The Google Search Engine with Like.
All kidding aside, every aspect of a Liberal Arts education will now be essential **in addition** to core technical skills. Writing, reading, critical thinking, history, logic, debating, etc. If...
-
mrrsm replied to the thread Microsoft Bing uses OpenAI - Chat-GPT to Finally 'Challenge' The Google Search Engine.If you are looking around at the AI Driven Job Market...Drop in on THIS Link and scope their tabs for Training Courses...and do One Other Thing... Take a look at the broad spectrum of AI from a...
-
If your tune also included a delete of the codes for the EV fan clutch, you could get a regular thermal clutch for a 2008. The EV clutches are so bad that even GM went back to the old fashion...
-
why did you pull the radio? Maybe there was some "back feeding" happening for voltages and when its gone, so is the "back feeding".... maybe check fuses.
-
mrrsm replied to the thread Microsoft Bing uses OpenAI - Chat-GPT to Finally 'Challenge' The Google Search Engine.Here are Two Touchstone Videos that ground the issues of The Promise of LOSS of Employment in The Age of AI...and the Miraculous Engineering Skills and Insights coming from Anastasi explaining...
-
mrrsm reacted to Berns's post in the thread Help Needed - Saab 9-7x front bumper mounting plastic pieces/clips with Like.
Happy to report that I was able to piece the broken bracket together. Glued and then I used a hot stapler from Harbor Freight to strengthen the plastic bracket. Fender and bumper went together...
-
mrrsm reacted to Aroc's post in the thread Engine Dies at 40mph 1500rpm and 140 degrees... with Like.
The intermittent shutdown at idle shortly after startup during driving happened to my truck recently. It was the cam position sensor on passenger side head that lost its place after driving a...
-
mrrsm reacted to movietvet's post in the thread Engine Dies at 40mph 1500rpm and 140 degrees... with Like.
Thankfully "The Auto Teacher" gives clear and concise instructions for the code and the part replacement steps. I have done videos at you tube, some for the 2002 Trailblazer Linda owns. I tried to...
-
mrrsm reacted to christo829's post in the thread NEED HELP 05 Trailblazer Fuel Gauge Problem. Bad PCM? with Like.
That's pretty classic for a stepper motor failure. When some of mine failed, they'd twitch up a little bit when they were supposed to do the sweep, then just fall back, usually below the zero...
-
mrrsm reacted to TJBaker57's post in the thread NEED HELP 05 Trailblazer Fuel Gauge Problem. Bad PCM? with Like.
That may be stepper motor failure? I cannot say for sure as I have never personally seen stepper motor failure. When the key is first turned to RUN do the gauges all sweep counterclockwise towards...
-
Probably not unless you start running a turbo or making tons of extra power. Watched a video from Atlas Industries and even they said that if it's properly maintained and not modified, the stock...
-
Time to wrap this up. After I got a new switch yesterday I got busy on it this morning. After I removed the old switch I hacksawed the plastic housing off then machined the guts out on the lathe...
-
mrrsm replied to the thread "Check Gages" light, oil pressure at 0.A Related Thread covering "Nominal Oil Pressure" via @TJBaker57 in Post #29 ...and quite a few OTHER Things about the O-P in the GM Vortec 4200 that can also go *Bump* in the Night and well...
-
Ongoing 2 piece driveshaft problems on a neighbors 2003 Dodge Ram 2500 4x4 crew cab 5.7 gas engine. Not to long ago the carrier bearing came completely apart but the shop that did that work did...
-
Her biscuits and gravy, both, have seasonings that I find delicious. Sausage in the gravy, too. There is a crunchy outer texture to the biscuits, that is spicy and sweet, all at the same time.
-
I did a round trip this weekend to see my aging parents and one of my brothers. Was a worthwhile trip. Helped out around the house and a great visit. I took the WL Grand Cherokee and it...
-
-
Loading…
-
Loading…
