Recent content by Daniel417

Anyone around the Joplin area?

That's good to know. I just like to modify.

I only planned on upgrading to 16mm. But I would like a better steering ratio. Thanks for the info. And I looked into replacing pump to rack and rack to cooler lines. I got a good deal on cheap 14 mm. So I'm replacing tie rods now. Later I'll do entire setup.

My steering wheel is starting to get really sloppy. Sometimes when I brake it pulls to left. I know I need new tie rods, inner and outer and a new boot on drivers side. All together I can get the parts for around $90. I have an 02 with 14mm threads. While studying up for what to do I found a...

I had the same car last year. They are great Lil cars.

I have a 2002 the 90° angle was fixed on later models. I have a section of garden hose that fit right over the inlet. Made flushing a lot easier. O'Reilly has a Dorman 800-401 Heater Hose Quick Connect you could modify for a flush system.

Just an update. I originally replaced the shorter hose with an after market setup. I used a 90 quick coupler and a piece of molded hose almost identical to orginal. I was having a problem with my heater acting restricted and barely blowing. Well I upgraded from that to an oem acdelco 2007 hose...

Thanks for the link mooseman. That was exactly what I needed.

Have you disconnected the battery for 30 minutes? Next I'd check power @ fuse. Then @ actuator.

http://www.harborfreight.com/7-pc-metric-stubby-combination-ratcheting-wrench-set-61402.html

I tried on my phone and tablet.

After I click on the link and enter password it tells me download unsecessful

It won't let me download? Are these still available?

Gp king sounds like a relay. Is your system digital or manual?

Thread hijack. I have a problem with my heat barely blowing. Everything functions as it should besides low circulation when heaters on. Has anyone had to replace heater core or clean it? I just want to know steps to access it, to clean it.