Recent content by retiredcopper

Negative Toll,..I checked the BCM,no modifications have been done.

understood....and be advised all the other lights are working as they should

Blck,first I'm hearing of a 2nd sensor...might you know where it's located?

MR,I had already gone thru these,were no help finding out why the DRL's are working at full power instead of the 50 or 60%...much appreciated for the post....I'll keep digging....stay safe!

When I first purchased my 09 with one Tb w/I6 the DRL's weren't working at all,a swap of the dash sensor solved that problem. The other day I noticed the DRL's are operating at "FULL" power same as if the low beams were on. Anybody have this problem?...Please be advised I already swapped out...

Mr....This was a wealth of info!.....can be done...not hard at all.....Thank you!....stay well/safe

I changed the steering rack on my 09 Trailblazer back in Sept. 2022,the lower shaft looked to be okay so I transferred it from the old rack to the new. As luck would have it,I now have to change it. Has anyone swapped the "LOWER" shaft out with the rack in place?...please advise.....

It was a 7/8 spark plug socket I borrowed...thanks Moose.....thanks all!!

Morning,does anyone who has done a rack install remember the size of the nut on the long bolt that holds the rack in place. The head is 21mm. I had borrowed a deep socket when I did the swap and want to pick one up to add to my tool box and can't for the life of me remember what size it...

Thanks all for the input....checking the wires on the sensor, I can do...wish me luck!!

Update:...had to bite the bullet and take it to a shop.....got me for an hours labor,but the good news:...Compression test was normal on all cylinders and no abnormal number of misfires that would set off any alarms...Moose,I'm going to follow suit and just leave it alone. Now for the bad...

Thanks Moose,just asked my neighbor and he has the gauge and some fittings....lets see what happens...

TJ,she runs fine and no loss of power at all...only when the light comes on and I cringe...already know what it is...

09 TB w/I6...some months back started getting a p0306 code....did the usual....swapped the coil to another cylinder and did the same with the plug as well(be advised plugs are only a few months old,coils are all ACdelcos and MIGHT be original). Traveled approx. 500 miles after resetting the...

Moose,I did the fuel pump last month,thinking it was going to be a cluster,but it's running...I'll get this squared away too.....Thanks for the input....stay safe!