Recent content by WillyGood

Yea the belts on there correctly, the things running like a top. Between the new belt, cleaning the water pump pulley, changing the water pump (that was probably failing for a while), and the shift solenoids in the tranny i just did the truck hasnt felt this good in awhile. So ill clear the...

So i purged the air, the heat returned in the cabin and the temp sits at 205, exactly where it used to sit.. Actually a tick lower! Thanks so much! The problem i have now is the CEL. I got it down to autozone the codes were p0117, p0340, p0621, p0426. From what i gather these are all sensor...

ahh, saw the video after I posted the question how to. I'll go try it out. I'll let you guys know. Thanks

How would one go about releasing the air? should it get to a certain temp theb open the system somewhere?

Interesting, can I purge it from the rad cap?

Negative, well actually I couldnt remember something I never learned in this first place lol. What is this burping you speak of?

I had the same problem, p0753 was coming up. After the transmission shop told me i needed to rebuild it and they needed a deposit of $500, I said (after reading this thread in the waiting room) "but sir, cant you just change the solenoids?" His response was "we dont f with solenoids" lol this is...

I just got done changing my water pump on my 04 tb with 127k mikes on it. Against my better judgement (I think?) I did not change the fan clutch at the same time. Everything went pretty smooth considering it was 15 degrees out and I had never done this repair before. One thing was when I was...

I recently did the water pump replacement. I was able to brake it free using a big pair of channels on the water pump pulley bolt heads and a 24" adjustable on the fan clutch part. I had to remove the two bolts on the fan clutch to get the adjustable on. Another thing i did which i don't...

sweet :thumbsup:

Me too. I thought it was coming from that cable also because that's where it collects and seamed the wettest. But it wasn't. It comes down the a frame and drips down right next to the hood release. Mine was only on the drivers side too. Try those four screws that hold that piece of molding on...

Rudeawaking, this is the same exact problem I had a couple of weeks ago. Everything is identical to the places you are finding the water to the steps that you have taken to correct it. I found a service bulletin that helped me and I can almost guarantee it will fix your problem too. I guess I...

Recently I was having problems with water soaking the drivers side floor mat during heavy rain or a run threw the car wash. There is another post on this site with a TB owner having the same problem and there is some useful info in there also. I started a new thread because I was able to find a...

How can i find the previous post with the pics?

Nazareth PA